AMS 209.20 Stainless Steel Piezometer Groundwater Sampling Kit
AMS 209.20 Stainless Steel Piezometer Groundwater Sampling Kit
The SST Piezometer Groundwater Sampling Kit is designed to provide a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater measurements and collect samples to a depth of 12', below ground surface.
Male-to-male couplers maintain a consistent outside diameter throughout the entire drive string, facilitating easier push and pull. Unlike other Piezometer designs with welded fittings, this Piezometer allows the end-user to remove and replace the internal SST Screen & Spring for proper decontamination between samplings, a highly valuable feature unique to this design.
Typically, a Peristaltic Pump is connected at the other end of the tubing, although Bladder Pumps, SST Bailers and Foot Valves (Inertial Pumps) may also be used. The inside diameter of the Piezometer is 7/8”, which provides plenty of room for 3/8” or 5/8” Water Level Meters to be used prior to sampling.
Kit Contents:
- (1) 1-1/4" X 14" Stainless Steel Piezometer w/ Coupler
- (4) 1-1/4" X 3' Stainless Steel Piezometer Extension w/ Coupler
- (5) 1-1/4" Expendable Tip
- (5) #50 Stainless Steel Mesh Screen
- (1) Piezometer Point Holder
- (1) Twist-to-Lock Connector, 3/16" ID
- (1) Gas Vapor Probe Dedicated Tip & Fluoropolymer Umbrella
- (1) Gas Vapor Probe Dedicated Tip Screen #50 Mesh
- (1) Piezometer Slotted Pull Adapter
- (1) 3/4" Male Thread to Piezometer Threadless Drive Adapter
- (1) Piezometer Tee Jack Adapter
- (1) 3/16" ID X 1/4" OD X 50' Fluoropolymer Tubing
- (1) 1-3/4" Regular Auger, 5/8" Thread
- (2) 3' Extension, 5/8" Thread
- (1) 18" Rubber-Coated Cross Handle, 5/8" Thread
- (1) 1" X 24" Nylon Brush
- (1) Probe Wire Brush
- (2) 12" Crescent Wrench
- (1) Heavy-Duty Slide Hammer, 3/4" Thread
- (1) Big Foot Removal Jack
- (2) 4' Deluxe Equipment Case
Original: $2,999.99
-65%$2,999.99
$1,050.00
Description
AMS 209.20 Stainless Steel Piezometer Groundwater Sampling Kit
The SST Piezometer Groundwater Sampling Kit is designed to provide a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. This complete kit includes everything needed to take groundwater measurements and collect samples to a depth of 12', below ground surface.
Male-to-male couplers maintain a consistent outside diameter throughout the entire drive string, facilitating easier push and pull. Unlike other Piezometer designs with welded fittings, this Piezometer allows the end-user to remove and replace the internal SST Screen & Spring for proper decontamination between samplings, a highly valuable feature unique to this design.
Typically, a Peristaltic Pump is connected at the other end of the tubing, although Bladder Pumps, SST Bailers and Foot Valves (Inertial Pumps) may also be used. The inside diameter of the Piezometer is 7/8”, which provides plenty of room for 3/8” or 5/8” Water Level Meters to be used prior to sampling.
Kit Contents:
- (1) 1-1/4" X 14" Stainless Steel Piezometer w/ Coupler
- (4) 1-1/4" X 3' Stainless Steel Piezometer Extension w/ Coupler
- (5) 1-1/4" Expendable Tip
- (5) #50 Stainless Steel Mesh Screen
- (1) Piezometer Point Holder
- (1) Twist-to-Lock Connector, 3/16" ID
- (1) Gas Vapor Probe Dedicated Tip & Fluoropolymer Umbrella
- (1) Gas Vapor Probe Dedicated Tip Screen #50 Mesh
- (1) Piezometer Slotted Pull Adapter
- (1) 3/4" Male Thread to Piezometer Threadless Drive Adapter
- (1) Piezometer Tee Jack Adapter
- (1) 3/16" ID X 1/4" OD X 50' Fluoropolymer Tubing
- (1) 1-3/4" Regular Auger, 5/8" Thread
- (2) 3' Extension, 5/8" Thread
- (1) 18" Rubber-Coated Cross Handle, 5/8" Thread
- (1) 1" X 24" Nylon Brush
- (1) Probe Wire Brush
- (2) 12" Crescent Wrench
- (1) Heavy-Duty Slide Hammer, 3/4" Thread
- (1) Big Foot Removal Jack
- (2) 4' Deluxe Equipment Case
