Grundfos Redi-Flo2 Submersible Groundwater Pump

Grundfos Redi Flo2 (MP1) Submersible Groundwater Pump

The MP 1 submersible pump (also known as the Redi-Flo2 is specially designed for purging and sampling of monitoring wells. It’s a unique pump in that it fits a 2” monitoring well while being able of pumping water up to an impressive 90 metres. It allows you to collect groundwater samples from deep wells for analysis.

The pump motor is controlled by an adjustable frequency converter. Thanks to the variable setting of the frequency, the capacity of the pump can be adjusted from 0 to 2 m3 /hour. This results in a steady flow of anaerobe water. 

 

Features:

• Pump housing completely made of stainless steel to prevent contamination of
  the sample
  
• Maximum lift 90 metres of water
  
• Speed (flow) regulated
  
• Pump is protected against overload
  
• Converter for either 110 or 240 Volts, single phase to three phase
  
• Can be fitted with PTFE or LDPE tubing in various lengths, or no tube
  
• Operated from mains or electronically regulated 110 or 240 Volt power generator
  
• Field replaceable impellers

 

Specifications:

Motor Type: Water-Filled, variable speed submersible
Maximum Fluid Temperature: 86° F (30° C)
Minimum Fluid Temperature: 34° F (1° C)
Maximum Input Power: 1.5 KW (2HP)
Maximum Motor Voltage: 3PH X 220 Volts at 400Hz
Maximum Motor Current: 5.5 Amps
Discharge Size: 1/2" Female NPT
Flow Range: Continuous / Variable (100ml/min. - 9 U.S. GPM)
Motor Protection: Thermal Overload - Thermik Geratebau, Series SY6
Disconnect Temperature: 176° F (80° C)
Rated Current: 5 Amps
Current Overload: Incorporated into Redi-Flo VFD
Installation: Unit to be installed vertically for submerged operation.
Standard Lead Lengths: 100, 200, and 300 Ft.

 

Please note--Grundfos RediFlo VFD and Power Cable required for operation of Grundfos RediFlo 2 Submersible Groundwater Pump