MagStrainer™ H2-400 Advanced Magnetic Filtration, 4 Inch Flange, 374 GPM
MagStrainer™ H2, 4 Inch Flange, 374 GPM
The MagStrainer H2 is designed for large and small commercial and industrial systems and removes nearly 100% of magnetite and other unwanted debris from hydronic systems. The filter utilizes powerful Neodymium high intensity magnetic rods. Designed to be an inline filter, the H2 gets installed on the return circuit close to the boiler as the system water flows back. The H2 captures visible and microscopic magnetite (iron oxide) and other non-magnetic contaminants (scale) and collects them in the filter. On larger systems, units may also be installed elsewhere to offer extra protection for radiators and piping.
MagStrainer Datasheet
Put a Stop to Destructive Corrosion and Heating System Damage
The MagStrainer H2 filter captures existing contamination, prevents further buildup, increases system efficiency thus lowering costs, protects boilers and ECM heat pumps, prevents “cold spots” in the systems, extends the long term life of these systems, and reduces maintenance overall.
How it Works
The core feature of the H2 is a set of powerful, high intensity magnetic rods. As the water flows through the filter, magnetite along with other matter gets drawn to the magnets and collects around the thin channels around the magnets. The water continues to flow through. The H2 is easily cleaned. Periodically the black sludge caught on the magnets gets removed by either easily removing the magnets or by blowing out the sludge through a drain valve.
Other Features:
- Compatible with all heating systems
- Easy to maintain
- Clean in minutes with two easy methods
- Automatic air vent (releases trapped air maintaining heating efficiency)
- Rare Earth Neodymium Magnets (9,000 Gauss)
- Full flow filter
- Fits on to horizontal or vertical pipework
- Small physical profile for easy integration
- All valves and fittings included
- Temperature: 41º to 302ºF / 5º to 150ºC
- Full-flange gaskets for robust sealing at high temperatures
- Operating pressure is +/- 174psi / 12 bar
- Large collection reservoir
Lead times can vary based on the unit ordered. Please contact us for estimated lead times. Product Dimensions and measurements are for approximate reference and may vary. PRM reserves the right to modify our product dimensions and tolerances without prior notice. Please note that some discrepancies are normal and not grounds for product returns or refunds.
Original: $4,809.59
-65%$4,809.59
$1,683.36
Description
MagStrainer™ H2, 4 Inch Flange, 374 GPM
The MagStrainer H2 is designed for large and small commercial and industrial systems and removes nearly 100% of magnetite and other unwanted debris from hydronic systems. The filter utilizes powerful Neodymium high intensity magnetic rods. Designed to be an inline filter, the H2 gets installed on the return circuit close to the boiler as the system water flows back. The H2 captures visible and microscopic magnetite (iron oxide) and other non-magnetic contaminants (scale) and collects them in the filter. On larger systems, units may also be installed elsewhere to offer extra protection for radiators and piping.
MagStrainer Datasheet
Put a Stop to Destructive Corrosion and Heating System Damage
The MagStrainer H2 filter captures existing contamination, prevents further buildup, increases system efficiency thus lowering costs, protects boilers and ECM heat pumps, prevents “cold spots” in the systems, extends the long term life of these systems, and reduces maintenance overall.
How it Works
The core feature of the H2 is a set of powerful, high intensity magnetic rods. As the water flows through the filter, magnetite along with other matter gets drawn to the magnets and collects around the thin channels around the magnets. The water continues to flow through. The H2 is easily cleaned. Periodically the black sludge caught on the magnets gets removed by either easily removing the magnets or by blowing out the sludge through a drain valve.
Other Features:
- Compatible with all heating systems
- Easy to maintain
- Clean in minutes with two easy methods
- Automatic air vent (releases trapped air maintaining heating efficiency)
- Rare Earth Neodymium Magnets (9,000 Gauss)
- Full flow filter
- Fits on to horizontal or vertical pipework
- Small physical profile for easy integration
- All valves and fittings included
- Temperature: 41º to 302ºF / 5º to 150ºC
- Full-flange gaskets for robust sealing at high temperatures
- Operating pressure is +/- 174psi / 12 bar
- Large collection reservoir
Lead times can vary based on the unit ordered. Please contact us for estimated lead times. Product Dimensions and measurements are for approximate reference and may vary. PRM reserves the right to modify our product dimensions and tolerances without prior notice. Please note that some discrepancies are normal and not grounds for product returns or refunds.
